THE CUSTOM LEG

THE CUSTOM LEG / Iron leg × Z type

$245.00
税込

*Product size in the photo is depth 600mm x width 1000mm

The price includes shipping charges.

Please contact us from the size order inquiry page.

Estimated shipping: We will ship your order within 2-3 weeks.


Z-shaped table iron legs that take full advantage of sheet metal processing technology.

Instead of mass production, each piece is handmade by sheet metal craftsmen.

If you cut the iron tube at the wrong angle, it won't form a beautiful Z shape, so this is a product packed with Japanese technology.

The space from the front feels wide, making it perfect for a work table, study desk, etc.

Painting is also done by domestic craftsmen, and baked paint is used to improve rust prevention, weather resistance, and functionality.


*We also accept orders for 3 legs.

About product specifications
[Width 420mm]
size
  • Top width 420mm x bottom width 420mm
  • height: 670mm

*Adjuster height is not taken into consideration.

Dimension details

Upper plate: width 420mm x depth 100mm x height 2.3mm

Iron tube: 40mm x 40mm

Adjuster thickness: 6mm

material

steel

Finishing

Baked paint

maximum weight

3kg (per leg)

Load capacity

80kg

*Based on our standards. Varies depending on type of top plate, installation method, etc.

remarks
  • Also sold as 3 legs
  • Accessories: 24 wood screws, 4 adjusters (40Φ)
  • Hole diameter: 8mm = M6 screw compatible 
  • Regarding hole positions (12 holes/1 leg)

    divided into 5 equal parts

    Holes are drilled at positions divided into 5 equal parts from the holes at both ends (each 20 mm).

  • The adjuster can be adjusted up to +5mm . The adjuster is used to adjust the unevenness of the floor, not to increase the height. Please note that stretching it more than 5mm may impair stability.
  • There are 4 screw holes in total, 2 points evenly spaced 2 cm apart from both ends towards the center.
  • Due to slight individual differences, there may be an error of approximately ±2mm in the stated size.

    [Width 620mm]
    size
    • Upper width 620mm x lower width 620mm
    • height: 670mm

    *Adjuster height is not taken into consideration.

    Dimension details

    Upper plate: width 620mm x depth 110mm x height 2.3mm

    Iron tube: 50mm x 50mm

    Adjuster thickness: 6mm

    material

    steel

    Finishing

    Baked paint

    maximum weight

    7kg (per leg)

    Load capacity

    100kg

    *Based on our standards. Varies depending on type of top plate, installation method, etc.

    remarks
    • Also sold as 3 legs
    • Accessories: 24 wood screws, 4 adjusters (40Φ)
    • Hole diameter: 8mm = M6 screw compatible 
    • Regarding hole positions (12 holes/1 leg)

      divided into 5 equal parts

      Holes are drilled at positions divided into 5 equal parts from the holes at both ends (each 20 mm).

    • The adjuster can be adjusted up to +5mm . The adjuster is used to adjust the unevenness of the floor, not to increase the height. Please note that stretching it more than 5mm may impair stability.
    • There are 4 screw holes in total, 2 points evenly spaced 2 cm apart from both ends towards the center.
    • Due to slight individual differences, there may be an error of approximately ±2mm in the stated size.
        about shipping cost

        Flat rate 2000 yen (tax included)