THE CUSTOM LEG / iron leg x square FB
*Product size in the photo is depth 600mm x width 1000mm
The price includes shipping charges.
Please contact us from the size order inquiry page.
Estimated shipping: We will ship your order within 2-3 weeks.
Square type table iron legs that take full advantage of sheet metal processing technology.
Instead of mass production, each piece is handmade by sheet metal craftsmen.
It uses a flat bar (flat steel) and has a simple and slim design, so it can be matched with various types of top plates.
Painting is also done by domestic craftsmen, and we use baked paint to enhance rust prevention, weather resistance, and functionality.
*We also accept orders for 3 legs.
About product specifications
[Width 420mm]
size
- Top width 420mm x bottom width 420mm
- Height: 670mm
*Adjuster height is not taken into consideration.
Dimension details
Upper plate: width 420mm x depth 65mm x height 6mm
Flat steel: 6mm x 65mm
Adjuster thickness: 6mm
material
steel
Finishing
Baked paint
maximum weight
7kg (per leg)
Load capacity
100kg
*Based on our standards. Varies depending on type of top plate, installation method, etc.
remarks
- Also sold as 3 legs
- Accessories: 24 wood screws, 4 adjusters (40Φ)
- Hole diameter: 8mm = M6 screw compatible
-
Regarding hole positions (12 holes/1 leg)
Holes are drilled at positions divided into 5 equal parts from the holes at both ends (each 20 mm).
- The adjuster can be adjusted up to +5mm . The adjuster is used to adjust the unevenness of the floor, not to increase the height. Please note that stretching it more than 5mm may impair stability.
- There are 4 screw holes in total, 2 points evenly spaced 2 cm apart from both ends towards the center.
- Due to slight individual differences, there may be an error of approximately ±2mm in the stated size.
[Width 620mm]
size
- Upper width 620mm x lower width 620mm
- height: 670mm
*Adjuster height is not taken into account.
Dimension details
Upper plate: width 620mm x depth 65mm x height 6mm
Flat steel: 6mm x 65mm
Adjuster thickness: 6mm
material
steel
Finishing
Baked paint
maximum weight
8kg (per leg)
Load capacity
100kg
*Based on our standards. Varies depending on type of top plate, installation method, etc.
remarks
- Also sold as 3 legs
- Accessories: 24 wood screws, 4 adjusters (40Φ)
- Hole diameter: 8mm = M6 screw compatible
-
Regarding hole positions (12 holes/1 leg)
Holes are drilled at positions divided into 5 equal parts from the holes at both ends (each 20 mm).
- The adjuster can be adjusted up to +5mm . The adjuster is used to adjust the unevenness of the floor, not to increase the height. Please note that stretching it more than 5mm may impair stability.
- There are 4 screw holes in total, 2 points evenly spaced 2 cm apart from both ends towards the center.
- Due to slight individual differences, there may be an error of approximately ±2mm in the stated size.